-
Products
Esco PROtect Wireless Monitoring System
- Real Time Monitoring System
- Wireless Technology that protects your samples 24/7 with continuous data logging function and immediate alarm notifications
- Centralize monitoring for all your equipment (any brands and any models):
- -Temperature for refrigerators, freezers, cold chambers, cryogenic tanks and -80 freezers.
- -Temperature and CO2 for ovens/incubators.
- -Temperature and humidity for climatic chamber, ambient area
- Measurement and recording of physical parameters such as temperature, CO2, and humidity.
- Direct reading on the display.
- Compared to Wi-Fi, radio frequency has longer battery life and longer transmission distance.
- Using radio frequency, repeaters can be installed to extend the distance which cannot be easily done by some Wi-Fi system.
- Alarm Capabilities –Securing Your Samples
- Real time alarm management
- Visual and audible alert
- Remote alarm notification via E-mail.
- Simple and Cost Effectiveness
- Fast Installation, commissioning and maintenance.
- Can centrally monitor integrity of samples even during a power outage or electronic failure of refrigerator, freezer, incubator, oven, etc.
- Accurate and efficient compared to manual data readings.
- Reduce labor cost for manual data readings. Manual data readings are less accurate, less reliable and time consuming. Saves you time and money.
- Readily accessible thru the display or monitoriing software thru PC.
- Multi-site installation. Multiple buildings can be monitored accros town, another country.
- Interchangeable digital probes with embedded memory to facilitate maintenance procedures.
- Modern and eco-friendly.
- Traceability and Security - Quality Assurance
- Comply with quality assurance procedures: ISO 17025 and ISO 15189 norms, Good laboratory practices and local regulations recommend the use of tools to guarantee the reliability of your temperature controlled equipment (ultra-low temperature freezers, lab freezers, lab refrigerators, lab ovens, lab incubators, refrigerated incubators, CO2 incubators, etc).
- Audit trail traceability for conformance to 21 CFR part 11
- Local regulations or recommendations within Quality Management Programs
- Remote Monitoring and Datalogging
- Remote visualization of data
- Downloaded database is presented in easy-to-understand reports or graphs
- PROtect software enables to visualize recorders located on the installation map and to manage your alarm
Modems, Relays and Alarm System Item Codes Description Features/Specifications 1081050 ESCO PROtect UN-1
-868 Mhz band- Single Channel RF Transmitter;-200 to +400°C;
4-20mA;0.1V;Dry Contact
1081051 ESCO PROtect UN-1
-902 Mhz band1081052 ESCO PROtect UN-2
-868 Mhz band- Dual Channel RF Transmitter;-200 to +400°C;
4-20mA;0.1V;Dry Contact
1081053 ESCO PROtect UN-2
-902 Mhz band1081054 ESCO PROtect DG-1
-868 Mhz band- Single Channel RF Transmitter;-40°C
to 80°C/ tH : -30°C to 70°C from
0 to 100% RH non-condensing
1081055 ESCO PROtect DG-1
-902 Mhz band1081058 ESCO PROtect MD-1
-868 Mhz band- Connects to your PC, it enables communication with Esco PROtect UN/DG
- Communicates with an unlimited number of recorders.
- Remote alarm driven by integrated dry contact output
(vocal telephonic transmitter, buzzer, light). - Software, PC or power supply failure alarm.
- Can be used with or without Esco PROtect Relay.
1081059 ESCO PROtect MD-1
-902 Mhz band1081060 ESCO PROtect EMD-1
-868 Mhz band- Enables Ethernet connection to maximize distances
between recorders and PC servers
1081061 ESCO PROtect EMD-1
-902 Mhz band1081062 ESCO PROtect RL-1
-868 Mhz band- Enables direct RF communication to maximize distances between recorders and PC servers.
- Works with external power supply and supplied with a rechargeable battery.
- Includes two power ranges: 25 mW to communicate with recorders and
500 mW to communicate with Modem.
1081063 ESCO PROtect RL-1
-902 Mhz band1081064 ESCO PROtect AM-1
-868 Mhz band- Provides real time warning if a problem occurs
- Integrated sound and visual alarm.
- Works with an external power supply and supplied with a
backup battery. - Push button for local alarm acknowledgement.
- Relay output to trigger remote alarm
(vocal telephonic transmitter …) - Warns Esco PROtect software when the battery is low.
1081065 ESCO PROtect AM-1
-902 Mhz bandOptions and Accessories Item Codes Description Features/Specifications 1081070 PROtect Software and Dongle - Remote visualization of data.
- Downloaded database is presented in easy to understand
reports or graphs. - PROtect software enables to visualize recorders located on the installation map and to manage your alarm.
- Compliant with FDA (CFR 21 part 11)
- Note: PROtect software and dongle needs to be installed even if one (1) PROtect recorder (UN or DG) is connected to the equipment.
1081071 Audible and Visual Alarm Device - Warns if a problem occurs.
- Works with an external power supply.
- Connects directly to PROtect Modem or to PROtect Alarm.
- Audible and visual Alarm.
1081072 PT100 Probe - Type of Probe: Pt 100 Class B
- Measurement range: -200°C to + 260°C
- Type of cable: 3 wires (3m)
1081073 Digital Temperature Probe - Type of probe: Dallas
- Measurement range: -40°C to + 80°C (-45°C max)
- Type of cable: flat 3m cable
- Embedded memory for gauging parameters storage
1081075 Battery for Recorders - Lithium Battery
1081076 ESCO PROtect CO 2 probe - Measurement range: 0 - 20%
- Output: 4-20 mA
- Mounting: Wall mounting bracket supplied
- Supply: 230VAC
1081078 Power supply for USB Modem, Ethernet Modem and Alarm System - Power Supply for MD-1, EMD-1, AM-1
1081079 Power Supply for Relay - Power Supply for RL-1
1081080 Universal Adaptor Cable for CO2 and DP sensors- (5m) with connector IP67 for PROtect UN and DG.
1081081 Digital Temperature/Humidity Probe - Measurement range: -40 +80°C /0 100%HR
- Type of probe for T°: Pt 1000
- class A
- Accuracy: ±2%HR from 0 to 90%HR
±3%HR from 90 to 100%HR - Power: delivered by the SPYRF recorder
1081066
PROtect Test-1
868 MHz
• Use as a recorder to test connection between modem and recorder with
actual percentage signal
1081067
PROtect Test-1
902 MHz
1081068
PROtect Modem Test-1
868 MH
• Use as a modem to test connection between modem and recorder with
actual percentage signal
1081069
PROtect Modem Test-1 902 MHz
1081070
PROtect Software
and Dongle
• Remote visualization of data.
• Downloaded database is presented in easy to understand reports or graphs.
• PROtect software enables to visualize recorders located on the installation
map and to manage your alarm.
• Compliant with FDA (CFR 21 part 11)
Note: PROtect software and dongle needs to be installed even if one (1) PROtect recorder (UN or DG) is connected to the equipment.
1081071
Audible and
Visual Alarm Device
• Warns if an alarm occurs.
• Works with an external power supply.
• Connects directly to PROtect Modem or to PROtect Alarm.
• Audible and visual Alarm.
1081072
PT100 Probe Class B
• Measurement range: -200°C to + 260°C
• Type of cable: 3 wires (3m)
1081288
PT100 Probe Class A
1081289
PT100 Probe Class 1/3 DIN
1081073
Digital
Temperature Probe
• Type of probe: Dallas
• Measurement range: -40°C to + 80°C (-45°C max) accuracy: ± 0.3°C
• Type of cable: flat 3m cable
• Embedded memory for gauging parameters storage
1081075
Battery for Recorders
• Lithium Battery for 10 pcs
1081081
Digital Temperature/Humidity Probe
Measurement range : -40 +80°C /0 100%HR
• Type of probe for T°: Pt 100 Class A
• Class A
• Accuracy: ±2%HR from 0 to 90%HR ±3%HR from 90 to 100%HR
• Power: delivered by the SPYRF recorder
1081166
Digital (Low) Temperature
• Type of probe: Low Temp Stainless Steel probe
• Type of cable: 3m Teflon Cable
• Measurement range from 0°C to -200°C accuracy: ± 0.2°C
• Immersion of cable: continuous immersion in water and glycolic solutions
and punctual immersion in alcoholic solutions”
1081080
Universal Adaptor Cable for CO2 and DP sensors
• (5m) with connector IP67 for PROtect UN and DG.
1081262
SMS Modem
• Warns if any alarm occurs by sending SMS to receiver’s number
• Needs a SIM card
• Supports multiple receiver’s number
• USB Connection
1081076
PROtect CO2 Probe
• Measurement range : 0 – 20%
• Output : 4-20 mA
• Mounting : Wall mounting bracket supplied
• Supply: 100-240 VAC
5072029
PROtect Differential
Pressure Probe
• Measurement Range: -100 Pa to +100 Pa
• Output: 4 - 20 mA
• Supply: 100-240 VAC (include Power Supply 1081263)
1081078
PROtect Test-1
902 MHz
• Power Supply for MD-1, EMD-1, AM-1
1081079
Power Supply for
Relay
• Power supply for RL-1
1081167
PROtect Door Contact
(With Sliding Doors)
• Use to sense door contact that door is open or close
1081168
PROtect Door Contact
(Non-Sliding Doors)
• Use to sense door contact that door is open or close
5072009
PROtect GSM
Auto Dialer set
• Warns if any alarm occurs by call receiver number (auto dialer)
• Needs a SIM card
• Supports until three (3) receiver numbers
• Supply: 100-240 VAC (include Power Supply 1081291)
PROtect Server:
Computer Architecture: 32 bit and 64 bit
OS: Windows 2000, XP, Vista, Win 7 and Windows 2003-2008 Server
RAM: 3 GB (min)
HD: 250 GB capacity or higher
Video Card: VGA compatible 1280 X 1024 32 bit (minimum)
PROtect Client:
Computer Architecture: 32 bit and 64 bit
OS: Windows 2000, XP, Vista, Win 7 and Windows 2003-2008 Server
RAM: 2 GB (minimum)
HD: 1 GB capacity or higher
Video Card: VGA compatible 1280 X 1024 32 bit (minimum)
- Real Time Monitoring System
- Wireless Technology that protects your samples 24/7 with continuous data logging function and immediate alarm notifications
- Centralize monitoring for all your equipment (any brands and any models):
- -Temperature for refrigerators, freezers, cold chambers, cryogenic tanks and -80 freezers.
- -Temperature and CO2 for ovens/incubators.
- -Temperature and humidity for climatic chamber, ambient area
- Measurement and recording of physical parameters such as temperature, CO2, and humidity.
- Direct reading on the display.
- Compared to Wi-Fi, radio frequency has longer battery life and longer transmission distance.
- Using radio frequency, repeaters can be installed to extend the distance which cannot be easily done by some Wi-Fi system.
- Alarm Capabilities –Securing Your Samples
- Real time alarm management
- Visual and audible alert
- Remote alarm notification via E-mail.
- Simple and Cost Effectiveness
- Fast Installation, commissioning and maintenance.
- Can centrally monitor integrity of samples even during a power outage or electronic failure of refrigerator, freezer, incubator, oven, etc.
- Accurate and efficient compared to manual data readings.
- Reduce labor cost for manual data readings. Manual data readings are less accurate, less reliable and time consuming. Saves you time and money.
- Readily accessible thru the display or monitoriing software thru PC.
- Multi-site installation. Multiple buildings can be monitored accros town, another country.
- Interchangeable digital probes with embedded memory to facilitate maintenance procedures.
- Modern and eco-friendly.
- Traceability and Security - Quality Assurance
- Comply with quality assurance procedures: ISO 17025 and ISO 15189 norms, Good laboratory practices and local regulations recommend the use of tools to guarantee the reliability of your temperature controlled equipment (ultra-low temperature freezers, lab freezers, lab refrigerators, lab ovens, lab incubators, refrigerated incubators, CO2 incubators, etc).
- Audit trail traceability for conformance to 21 CFR part 11
- Local regulations or recommendations within Quality Management Programs
- Remote Monitoring and Datalogging
- Remote visualization of data
- Downloaded database is presented in easy-to-understand reports or graphs
- PROtect software enables to visualize recorders located on the installation map and to manage your alarm
Modems, Relays and Alarm System Item Codes Description Features/Specifications 1081050 ESCO PROtect UN-1
-868 Mhz band- Single Channel RF Transmitter;-200 to +400°C;
4-20mA;0.1V;Dry Contact
1081051 ESCO PROtect UN-1
-902 Mhz band1081052 ESCO PROtect UN-2
-868 Mhz band- Dual Channel RF Transmitter;-200 to +400°C;
4-20mA;0.1V;Dry Contact
1081053 ESCO PROtect UN-2
-902 Mhz band1081054 ESCO PROtect DG-1
-868 Mhz band- Single Channel RF Transmitter;-40°C
to 80°C/ tH : -30°C to 70°C from
0 to 100% RH non-condensing
1081055 ESCO PROtect DG-1
-902 Mhz band1081058 ESCO PROtect MD-1
-868 Mhz band- Connects to your PC, it enables communication with Esco PROtect UN/DG
- Communicates with an unlimited number of recorders.
- Remote alarm driven by integrated dry contact output
(vocal telephonic transmitter, buzzer, light). - Software, PC or power supply failure alarm.
- Can be used with or without Esco PROtect Relay.
1081059 ESCO PROtect MD-1
-902 Mhz band1081060 ESCO PROtect EMD-1
-868 Mhz band- Enables Ethernet connection to maximize distances
between recorders and PC servers
1081061 ESCO PROtect EMD-1
-902 Mhz band1081062 ESCO PROtect RL-1
-868 Mhz band- Enables direct RF communication to maximize distances between recorders and PC servers.
- Works with external power supply and supplied with a rechargeable battery.
- Includes two power ranges: 25 mW to communicate with recorders and
500 mW to communicate with Modem.
1081063 ESCO PROtect RL-1
-902 Mhz band1081064 ESCO PROtect AM-1
-868 Mhz band- Provides real time warning if a problem occurs
- Integrated sound and visual alarm.
- Works with an external power supply and supplied with a
backup battery. - Push button for local alarm acknowledgement.
- Relay output to trigger remote alarm
(vocal telephonic transmitter …) - Warns Esco PROtect software when the battery is low.
1081065 ESCO PROtect AM-1
-902 Mhz bandOptions and Accessories Item Codes Description Features/Specifications 1081070 PROtect Software and Dongle - Remote visualization of data.
- Downloaded database is presented in easy to understand
reports or graphs. - PROtect software enables to visualize recorders located on the installation map and to manage your alarm.
- Compliant with FDA (CFR 21 part 11)
- Note: PROtect software and dongle needs to be installed even if one (1) PROtect recorder (UN or DG) is connected to the equipment.
1081071 Audible and Visual Alarm Device - Warns if a problem occurs.
- Works with an external power supply.
- Connects directly to PROtect Modem or to PROtect Alarm.
- Audible and visual Alarm.
1081072 PT100 Probe - Type of Probe: Pt 100 Class B
- Measurement range: -200°C to + 260°C
- Type of cable: 3 wires (3m)
1081073 Digital Temperature Probe - Type of probe: Dallas
- Measurement range: -40°C to + 80°C (-45°C max)
- Type of cable: flat 3m cable
- Embedded memory for gauging parameters storage
1081075 Battery for Recorders - Lithium Battery
1081076 ESCO PROtect CO 2 probe - Measurement range: 0 - 20%
- Output: 4-20 mA
- Mounting: Wall mounting bracket supplied
- Supply: 230VAC
1081078 Power supply for USB Modem, Ethernet Modem and Alarm System - Power Supply for MD-1, EMD-1, AM-1
1081079 Power Supply for Relay - Power Supply for RL-1
1081080 Universal Adaptor Cable for CO2 and DP sensors- (5m) with connector IP67 for PROtect UN and DG.
1081081 Digital Temperature/Humidity Probe - Measurement range: -40 +80°C /0 100%HR
- Type of probe for T°: Pt 1000
- class A
- Accuracy: ±2%HR from 0 to 90%HR
±3%HR from 90 to 100%HR - Power: delivered by the SPYRF recorder
1081066
PROtect Test-1
868 MHz
• Use as a recorder to test connection between modem and recorder with
actual percentage signal
1081067
PROtect Test-1
902 MHz
1081068
PROtect Modem Test-1
868 MH
• Use as a modem to test connection between modem and recorder with
actual percentage signal
1081069
PROtect Modem Test-1 902 MHz
1081070
PROtect Software
and Dongle
• Remote visualization of data.
• Downloaded database is presented in easy to understand reports or graphs.
• PROtect software enables to visualize recorders located on the installation
map and to manage your alarm.
• Compliant with FDA (CFR 21 part 11)
Note: PROtect software and dongle needs to be installed even if one (1) PROtect recorder (UN or DG) is connected to the equipment.
1081071
Audible and
Visual Alarm Device
• Warns if an alarm occurs.
• Works with an external power supply.
• Connects directly to PROtect Modem or to PROtect Alarm.
• Audible and visual Alarm.
1081072
PT100 Probe Class B
• Measurement range: -200°C to + 260°C
• Type of cable: 3 wires (3m)
1081288
PT100 Probe Class A
1081289
PT100 Probe Class 1/3 DIN
1081073
Digital
Temperature Probe
• Type of probe: Dallas
• Measurement range: -40°C to + 80°C (-45°C max) accuracy: ± 0.3°C
• Type of cable: flat 3m cable
• Embedded memory for gauging parameters storage
1081075
Battery for Recorders
• Lithium Battery for 10 pcs
1081081
Digital Temperature/Humidity Probe
Measurement range : -40 +80°C /0 100%HR
• Type of probe for T°: Pt 100 Class A
• Class A
• Accuracy: ±2%HR from 0 to 90%HR ±3%HR from 90 to 100%HR
• Power: delivered by the SPYRF recorder
1081166
Digital (Low) Temperature
• Type of probe: Low Temp Stainless Steel probe
• Type of cable: 3m Teflon Cable
• Measurement range from 0°C to -200°C accuracy: ± 0.2°C
• Immersion of cable: continuous immersion in water and glycolic solutions
and punctual immersion in alcoholic solutions”
1081080
Universal Adaptor Cable for CO2 and DP sensors
• (5m) with connector IP67 for PROtect UN and DG.
1081262
SMS Modem
• Warns if any alarm occurs by sending SMS to receiver’s number
• Needs a SIM card
• Supports multiple receiver’s number
• USB Connection
1081076
PROtect CO2 Probe
• Measurement range : 0 – 20%
• Output : 4-20 mA
• Mounting : Wall mounting bracket supplied
• Supply: 100-240 VAC
5072029
PROtect Differential
Pressure Probe
• Measurement Range: -100 Pa to +100 Pa
• Output: 4 - 20 mA
• Supply: 100-240 VAC (include Power Supply 1081263)
1081078
PROtect Test-1
902 MHz
• Power Supply for MD-1, EMD-1, AM-1
1081079
Power Supply for
Relay
• Power supply for RL-1
1081167
PROtect Door Contact
(With Sliding Doors)
• Use to sense door contact that door is open or close
1081168
PROtect Door Contact
(Non-Sliding Doors)
• Use to sense door contact that door is open or close
5072009
PROtect GSM
Auto Dialer set
• Warns if any alarm occurs by call receiver number (auto dialer)
• Needs a SIM card
• Supports until three (3) receiver numbers
• Supply: 100-240 VAC (include Power Supply 1081291)
PROtect Server:
Computer Architecture: 32 bit and 64 bit
OS: Windows 2000, XP, Vista, Win 7 and Windows 2003-2008 Server
RAM: 3 GB (min)
HD: 250 GB capacity or higher
Video Card: VGA compatible 1280 X 1024 32 bit (minimum)
PROtect Client:
Computer Architecture: 32 bit and 64 bit
OS: Windows 2000, XP, Vista, Win 7 and Windows 2003-2008 Server
RAM: 2 GB (minimum)
HD: 1 GB capacity or higher
Video Card: VGA compatible 1280 X 1024 32 bit (minimum)
Contact Us
Esco Micro Pte. Ltd.
21 Changi South Street 1 Singapore 486777
+65 65420833 | +65 65426920
Do have a Question ?
Download Apps
- Real Time Monitoring System
Australia
Global Site
Italy
Singapore
Japan
South Africa
China
Korea
Spain
Europe
Malaysia
Taiwan
France
North America
Thailand
Germany
Pakistan
UK
Hong Kong
Philippines
Vietnam
Esco Medical
Indonesia
Esco Pharma
Russia